Coventry driveways - get a competitive quote for your new driveway

Get a free, competitive quote for your drive, whatever its size or surface. Covering the whole of Coventry, from Earlsdon to Binley, with a fast turnaround on quotes.

  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ Fast turnaround
  • ✓ All CV postcodes covered
1930s red-brick semi in Coventry with a newly laid charcoal block paving driveway

Driveway services in Coventry

Free, competitive quotes for block paving, resin bound, tarmac, gravel and imprinted concrete driveways across Coventry. Itemised quotes with sub-base and drainage specified.

How it works

  1. Tell us about your drive. Two minutes in the quote form: the surface you want, rough size, your postcode.
  2. Get your free quote. Your job is priced properly and competitively, with a fast turnaround.
  3. You decide. Talk the quote through, ask questions, take your time. No charge, no pressure.

What does a new driveway cost in Coventry?

A replacement driveway in Coventry typically costs £2,300 to £6,000 for a standard two-car drive (45 to 55m²), material dependent. Gravel starts around £30/m², tarmac from £45/m², block paving and resin bound from £70/m², and pattern imprinted concrete from £85/m², supplied and laid including excavation and sub-base.

Coventry prices sit close to the Midlands average: keener than the South East, a shade above the far North. Ground conditions, drainage and whether the job needs a dropped kerb all move the final figure, which is why a proper quote always follows a site visit.

Typical Coventry driveway prices, supplied and laid (2026)
MaterialPrice per m²Typical 2-car driveLifespan
Gravel£30 to £65£1,400 to £3,000Indefinite (top-ups)
Tarmac£45 to £85£2,000 to £4,20015 to 25 years
Block paving£70 to £120£3,200 to £5,50020 to 30 years
Resin bound£70 to £120£3,200 to £5,50015 to 25 years
Pattern imprinted concrete£85 to £140£3,800 to £6,50020 to 30 years

The full breakdown, including dropped kerbs and drainage, is in our Coventry driveway cost guide.

Driveways in a city rebuilt in brick

Coventry's housing tells the story of the city: Victorian and Edwardian terraces in Earlsdon, Chapelfields and Stoke, interwar semis out through Coundon and Radford, post-war estates at Tile Hill and Canley, and newer developments at Binley and the city's eastern edge. Each era of housing takes a different surface well. The city's mix of brick and render is forgiving: brindle and charcoal block paving, warm buff resin blends and traditional tarmac with a sett edge all sit comfortably against it.

Front-garden paving rules apply here as everywhere: more than 5m² of non-permeable surface needs planning permission unless water drains to a lawn or border. Dropped kerbs are approved by Coventry City Council, and a new crossing always needs their sign-off before work starts. Our planning permission guide explains the rules and the council's process in plain English.

Shrink-swell clay and proper sub-bases

Much of Coventry sits on heavy clay that swells when wet and shrinks in dry summers. That seasonal movement is the local factor behind most premature driveway failures here: a skimped sub-base on this ground leads to cracking and sinking wheel tracks within a few winters. A good quote specifies excavation depth, sub-base thickness, drainage and edging, not just a square-metre rate.

What to expect from any quote

Whoever you use, four things are worth insisting on:

Which material suits a Coventry property?

As a broad rule across the city: Victorian and Edwardian terraces in Earlsdon, Chapelfields and Stoke suit gravel or sett-look block paving in traditional tones; 1930s semis in Coundon, Radford and Cheylesmore take brindle or charcoal block paving well; post-war and newer estates at Tile Hill, Canley and Binley often lean towards resin bound for a crisp modern finish; and larger plots towards Allesley and Keresley suit gravel or tarmac with a sett edge. Our materials comparison guide goes deeper, or read more about how the service works.

Get a competitive quote for your Coventry driveway

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote Call 07426 793938
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All CV postcodes covered

Where we cover

Coverage runs across the CV1 to CV6 postcodes, from Earlsdon and Chapelfields out through Coundon, Radford and Tile Hill to Binley, Stoke and the eastern estates.

Full details on the areas we cover page.

Frequently asked questions

How much does a new driveway cost in Coventry?

Most Coventry driveway replacements cost £2,300 to £6,000 for a typical two-car drive. Gravel is cheapest (from ~£30/m²), tarmac mid-range (£45 to £85/m²), and block paving, resin and imprinted concrete sit at £70 to £140/m² supplied and laid.

Do I need planning permission for a driveway in Coventry?

Only if you are paving more than 5m² of front garden with a non-permeable surface without drainage to a lawn or border. Permeable materials such as resin bound and permeable block paving avoid the rule. A dropped kerb always needs Coventry City Council approval.

How long does a driveway installation take?

A typical two-car drive takes 2 to 4 days: excavation and sub-base first, then the surface. Resin and tarmac are usually quickest; intricate block paving patterns take longer.

How quickly will I get a quote?

Fast. The quote form takes about two minutes and your enquiry is priced promptly after that. The quote itself is free.

Is the quote really free?

Yes. You describe the job in the form, professionals quote for it, and you decide in your own time. No charge and no pressure.

Driveway guides for Coventry homeowners

Get a competitive quote for your Coventry driveway

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote Call 07426 793938
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All CV postcodes covered